4-GL3B-01428 RI-459 PVC PHOTO LUMINESCENT AP905 WKPE144
Face Material
Photoluminescent soft vinyl.
Luminance method DIN 67510 charged at 1000 lux for 5 minutes:
After 10 Min 99 mcd/m2
After 60 Min 14 mcd/m2
| Type | Soft vinyl |
| Colour and Finish | Yellow/Green |
| Weight | 365 g/m2 ±10% ISO-536 |
| Thickness | 270 μ ±10% ISO 534-80 |
| Reference | AP905 |
| Type | Acrylic permanent |
| Min. Appl. Temp. | +10°C |
| Service Temp. | -40°C/+120°C |
| Shear | Very High |
| Tack | 12 N/25mm FINAT FTM9 |
| Final Adhesion | 15 N/25mm FINAT FTM2 |
This adhesive complies with FDA 175.105.
| Type | Siliconised two side PE Kraft |
| Colour and Finish | White |
| Weight | 144 g/m2 PP-032 – ISO ±10% 536 |
| Thickness | 155 μ ±10% ISO 534 |
| Transparency | n.a. % DIN 53 147-64 |
The material can be used for wall decorations and for photo luminescent safety signage.
Printable with solvent and UV screen printing ,offset UV and Ink Jet Eco Solvent Testing for suitability between media, printers and inks is always recommended prior to use.
24 months, applicable only to the material delivered by Ritrama which has not undergone further processing, under the following STORAGE CONDITIONS:
• This material must be stored at a temperature of 22°C ± 2°C and 50 ± 5% of Relative Humidity.
• Storage area must be dry and clean.
• Keep the material in the original packaging when not used in order to protect it from dust and contamination.
• Do not expose to direct sunlight or heat sources.
» Download PDF
